Product Card

MCP - Manual Control Panel
Mounted on the genset, complete with digital control unit (InteliNanoNT Plus) for
monitoring, control and protection of the generating set, protected through doors with
lockable handle.
CONTROL SECTION
• ON/OFF selector switch
• Emergency push button
• Differential protection with internal switch
• 5A Battery charger.
• Potentiometer for voltage adjustment (internal)
• Alternator AVR (single plug wiring)
Control unit InteliNanoNT Plus
- Biggest LCD screen
- Generating set voltage (3 phases).
- Generating set frequency.
- Generating set current (1 phases).
- Battery voltage, Service time and Running hours indication
- Remote start/stop from external signal
Protection:
- Low fuel level
- Battery charger failure
- low oil pressure
- high engine temperature
Extra Instrumentation (analogue)
- Voltmeter with selector switch (3 phases)
- Ammeters (n.3)
- Fuel level meter
- Mechanical hour counter
POWER SECTION
• It integrates 4 poles modular circuit breaker suitably rated with thermal and
magnetic overloads.
• Large and robust busbar with cables passage opening from the bottom for easy
power cable connection.
• Provided with safety switch to trip circuit breaker if operator open the power section
door to operate on the bus bar.
SOCKET SECTION
• Emergency push button √
• Two wires facility for remote start/stop √
• Plug for auxiliary power supply √
SUPPLEMENT - Only available when order :
Socket Kit Type SPKA1
3P+N+T CEE 400V 32A n 1
3P+N+T CEE 400V 16A n 1
2P+T CEE 230V 16A n 1
230V 16A SCHUKO n 1
Each socket with its own circuit breaker ●
Common differential protection for three phase sockets ●
Each single phase provided with earth fault protection ●
Other Kit Socket combinations available √