Brochure

!
!
POWER!ENGINEERING!
/RENTAL! 27! GRW!SERIES!
Only with panel MPP
The TLP4 supplement is an extension module with additional inputs and outputs (8 Digital I/O configurable) with Software and with 12/24V relay
board with 8 outputs. This supplement is available with MPP control panel
Model
Type - description
Technical specifications
Image
Available for
all GRW
models with
panel MPP
IGS-PTM
ANALOG/BINARY INPUT/OUTPUT MODUL
Ø 8 configurable binary inputs and 8
configurable binary open collector outputs
Ø 4 configurable analog inputs and 1 analog
output
Ø LEDs indicate the state of binary
input/output
Ø Measures the values from Pt100 and Ni100
sensors
Ø Analog inputs have the resistance range 0–
250 Ohm, voltage range 0–100 mV, current
range 0–20 mA – selectable via jumper
Ø Analog output 0–20 mA
Ø Connection via CAN bus
IR-B8 12 / 24V
INTERFACE CARD 8 RELAY
INTERFACE CARD 8 RELAY:
• 12VCC / 24VCC (according to the genset control
panel’s voltage)
• 1NC + 1NO
• Maximum current per pin 8 A
Only with panel ACP
The TLP7 supplement is an extension module with additional inputs and outputs (8/8 Digital & 4/1 Analogue for resistive sensors) with Software and
with 12/24V relay board with 8 outputs. This supplement is available only with ACP control panel
Model
Type - description
Technical specifications
Image
Available for
all GRW
models with
panel ACP
IG-IOM
ANALOG/BINARY INPUT/OUTPUT
MODULE
Ø 8 configurable binary inputs and 8
configurable binary open collector outputs
Ø 4 configurable analog inputs and 1 analog
output
Ø LEDs indicate the state of binary
input/output
Ø Connection to the controller with IOM cable
(2 meters)
Ø Resistance range 0–2400 Ohm
Ø Analog outputs 0–20 mA
IR-B8 12 / 24V
INTERFACE CARD 8 RELAY
INTERFACE CARD 8 RELAY:
• 12VCC / 24VCC (according to the genset control
panel’s voltage)
• 1NC + 1NO
• Maximum current per pin 8 A
TLPM
Free Voltage Contacts with module IGS-PTM+IR-B8 relay board
TLPA
Free Voltage Contacts with module IG-IOM + IR-B8