Product Guide

81
All pictures shown in this document are for illustration purpose only. Actual product features may vary due to product enhancement without notice.
PRODUCT GUIDE
–
GPW
Series
12.5 ARM1 – EM-BIO8-EFCP
Binary I/O plug-in module with earth fault current protection measurement.
 Extension module with 8 configurable binary terminals for inputs or
outputs
 Possibility to connect a current transformer for earth fault current
measurement and protection
In some case ARM1 is installed as standard to support some engines
functions/reading or is included in some option (e.g. ASV, AFP and DES) to allow the proper operation.
12.6 ARM2 – IGS-PTM
Analog/Binary Input/Output Module
 Configurable 8 binary and 4 analog inputs
 Configurable 8 binary and 1 analog output
 LEDs indicate the state of binary inputs/outputs
 Measures values from Pt100 and Ni100 sensors
 Analog inputs (resistance range 0-250 Ohms, voltage range 0-100mV,
current range 0-20mA - selectable via jumper)
 Up to 4 IGS-PTM can be connected to the controller
 UL certified
12.7 ARM3 – IR-B8 24V
The TLP option consist of a module with 8 INPUT/OUTPUT. This option allows to have additional input/output to
control unit.
Not possible to order alone. Must be ordered together with other expansion module (e.g. ARM1).
Compatibili
ty:
ACP, MPP. All genset.
Incompatibility: MRS, ASV.
Available as: Supplement
Compatibility:
ACP, MPP. All genset.
Incompatibility: MRS.
Available as: Supplement
Compatibility:
ACP, MPP. All genset.
Incompatibility: MRS.
Available as: Supplement