Product Guide

All pictures shown in this document are for illustration purpose only. Actual product features may vary due to product enhancement without notice.

PRODUCT GUIDE

–

GPW

Series

8.5.1.5 B10 – WSP - Water Separator Filter (Racor)

WSP option consist in Water separator fuel filter. This fuel filter allows to filter water

and dirty from the fuel before it entry into the engine.

This option is particularly suitable when fuel quality is not guaranteed and it may

compromise the proper engine operation. WSP protects the precision components

of your engine from dirt, rust, algae, asphaltenes, varnishes and especially water,

which is prevalent in low distillate fuels.

Filter brand: Racor

Filter model: 500FG

Filters capacity: 10 micron

How It Works

WSP remove Contaminants from fuel by three-stage-process:

Stage 1 – Separation using the fuel flow, the stationary turbine separates large solids and free water through

enhanced centrifugal force.

Stage 2 – Coalescing Smaller water droplets and solids coalesce on the conical baffle and fall into the

collection bowl.

Stage 3 – Filtration Engines will benefit from near 100% water separation and fuel filtration with Racor’s

proprietary Aquabloc® water repelling media.

The replaceable filters are available in 2, 10, and 30 micron ratings.

8.5.1.6 B10 – WSP2 - Water Separator Filter 2 (Mann Hummel)

WSP2 option consist in Water separator fuel filter. This fuel filter allows to filter water and dirty from the fuel

before it entry into the engine.

This option is particularly suitable when fuel quality is not guaranteed and it may compromise the proper

engine operation.

Filter brand: Mann Hummel

Filter model: Preline 270

Filters capacity: 6 micron

 Use with diesel fuel DIN ISO 590 (5 % FAME) DIN 51 628 (7 % FAME)

 Up to 270 l/h volume flow rate

 93% water separation

Compatibility:

All genset.

Incompatibility: WSP.

Available as: Supplement

Compatibility:

All genset.

Incompatibility: WSP2.

Available as: Supplement