Product Guide

39
All pictures shown in this document are for illustration purpose only. Actual product features may vary due to product enhancement without notice.
PRODUCT GUIDE
–
GPW
Series
7.6.7.2 A18 – ETB-G - External Terminal Board for German market
The External terminal board consist of robust copper bars that allows an easy external power cables connection.
ETB-G is a special terminal board suitable for German market, where all copper bar have same dimension (3
phases and N + PE) and power cables from the monoblock have same section.
Current
size
ETB-G
Number of
copper
bars
ETB
-
G Section of
copper bars
ETB
-
G Re
commended
cable size
[A] [mm2]
[3Ph+N+PE]
[mm2]
32A
5
5x (15x5)
5x[6]
40A
-
50A
5x (15x5)
5x[10]
63A
5x (15x5)
5x[16]
80
-
100A
5x (15x5)
5x[25]
125A
5x (15x5)
5x[35]
160A
5x(15x5)
5x[50]
250A
5x(20x5)
5x[95]
7.6.7.3 A18 DFS – Dual Frequency Switch (50/60Hz)
DFS option consist in two position selector mounted inside the control panel, which allows the possibility to
switch from 50Hz @400V to 60Hz @480V. When the DFS is combined with socket panel box the sockets can
only be used at 400/230V voltage output (to verify).
The DFS option includes a precision potenciometer (1kOhm) for voltage adjustament (mounted inside
the control panel).
Frequency switch with two position Potentiometer for voltage adjustment
Compatibility:
All genset. GCB2, GMB2.
Incompatibility: ETB, ERDF.
Available as: Supplement
Compatibility
:
ACP. Engine must be switchable and with electronic governor.
Incompatibility: MRS.
Available as: Supplement