Product Guide

34
All pictures shown in this document are for illustration purpose only. Actual product features may vary due to product enhancement without notice.
PRODUCT GUIDE
–
GPW
Series
7.6.2 A18 – LIFTING/HANDLING OPTIONS
7.6.2.1 A18 – GSB - Galvanized skid base with fork lift pockets
GSB option consist in a galvanized skid base that can be screwed to the genset base frame (removing feet).
This option allow to protect the genset base frame from the ground and being equipped with fork lift pockets,
it also allow a better handling by forklift.
Canopy Genset overall dimensions with GSB LxWxH*: 2200x1020x1416 mm
GSB weight: 68 kg
GSB material: S235 hot-dipped galvanized
.
* refer to standard genset with roof lifting point.
7.6.3 A18 – EXHAUST SYSTEM OPTIONS
7.6.3.1 A18 – ESA - Exhaust Spark Arrestor
The exhaust spark arrestor allows preventing the emission of
flammable debris from combustion sources.
Diesel Engine exhaust spark arrestors are a basic, but key safety
feature for both hazardous areas and lower risk diesel engine
applications such as agriculture or forestry where a spark from the
exhaust system may cause ignition of combustible material.
Those Spark Arrestors are designed as a safety device, specifically
for preventing the risk of fire caused by the spread of sparks emitted
from diesel engines.
All diesel engines have the potential to emit sparks even the latest clean engines. This is due to the high
carbon particulate content, carbon build up and the high ratio of free oxygen in the exhaust gas when on and
off load. The amount of energy carried by these sparks and the risk of them being transmitted over large areas
in the presence of flammable materials, gases or dust can significantly increase the chances of igniting fires
or causing explosions.
Compatibility:
All genset.
Incompatibility: None.
Available as: Supplement
Compatibility:
All genset.
Incompatibility: None.
Available as: Accessory