GCW22P-S-PFL-Product-Card

ACP - Automatic control panel
Automatic control panel mounted on the genset, complete with digital control unit
AC03 for monitoring, control and protection of the generating set.
INSTRUMENTATION DIGITAL (AC-03)
• Mains voltage.
• Generating set voltage (3 phases).
• Generating set frequency
• Generator set current (1 phase).
• Battery voltage
• Hours-counter.
COMMANDS AND OTHERS
• Four operation modes: OFF - Manual starting - Automatic starting - Automatic test
• Pushbutton for forcing Mains contactor or Genset contactor
• Push-buttons: start/stop, fault reset, up/down/page/enter selection
• Emergency stop button.
• Remote starting availability.
• DC system disconnection switch
• Automatic battery charger
• Settable PASSWORD for protection level
PROTECTIONS WITH ALARM
• Engine protections: low oil pressure, high engine temperature
• Genset protections: under/over voltage, overload, under/over frequency, starting
failure, under/over battery voltage, battery charger failure
PROTECTIONS WITH SHUTDOWN
• Engine protections: low oil pressure, high engine temperature
• Genset protection: under/over voltage, overload, under/over battery voltage
• Circuit breaker protection: III poles
• Differential protection
OTHERS
• Cover protection Power switch
OUT PUT PANEL ACP
Plinth row for connection from ACP to LTS panel. √