Product Card
ACP - Automatic control panel
Automatic control panel mounted on the genset, complete with digital control unit for
monitoring, control and protection of the generating set.
DIGITAL INSTRUMENTATION
• Mains voltage.
• Generating set voltage.
• Generating set frequency
• Generator set current
• Battery voltage
• Hours-counter.
COMMANDS AND OTHERS
• Four operation modes: OFF - Manual starting - Automatic starting - Automatic test
• Pushbutton for forcing Mains contactor or Genset contactor.
• Push-buttons: start/stop, fault reset, up/down/page/enter selection
• Emergency stop button.
• Remote starting availability.
• DC system disconnection switch
• Automatic battery charger.
• Settable PASSWORD for protection level.
PROTECTIONS WIYH ALARM
• Engine protections: low oil pressure, high engine temperature.
• Genset protections: under/over voltage, overload, under/over frequency, starting
failure, under/over battery voltage, battery charger failure.
PROTECTIONS WITH SHUTDOWN
• Engine protections: low oil pressure, high engine temperature.
• Genset protection: under/over voltage, overload, under/over battery voltage.
• Circuit breaker protection
• Differential protection.
OTHER PROTECTIONS:
• Emergency stop button
OUT PUT PANEL ACP
Plinth row for connection from ACP to LTS panel. √
Power cables connection to Circuit Breaker. √