Intelligent Stick Owner's Manual

ManualsBrandsPQI ManualsComputer HardwareIntellient Stick Pro 170

Intelligent Stick™

Rev. A.0 Sep 2006

Intelligent Stick

Pro170

BD09 Series

Summary of content (8 pages)

PAGE 1
Intelligent Stick™ Intelligent StickTM Pro170 BD09 Series Rev. A.
PAGE 2
Intelligent Stick™ Table of Contents 1. Introduction to Intelligent StickTM Pro 170............................................................................... 1 2. Main Features Overview ………..……….....................……...…...……………………………...… 1 3. Hardware Specification ………………………………………….………….……………………..… 1 3.1 USB Interface ………………………..………………………..….........…….………...……………… 1 3.2 NAND Flash Interface ……………………………………………...................….…...………………. 1 3.3 OS Support ……………………………………………………….......…........……..….
PAGE 3
Intelligent Stick™ Revision History Revision A.0 y Date 09/08 ‘06 History Remark New Creation Important!! Please make sure the driver matches the part number on your pen drive before you download. y Software AP System Requirements. One of following operation systems: Windows 98/98SE/Windows ME/Windows 2000/Windows XP y The advertised memory capacity of this device represents unformatted capacity.
PAGE 4
Intelligent Stick™ 1. Introduction to Intelligent StickTM Pro 170 The Intelligent Stick Pro 170 is a PQI patented technology. It combines characteristics of a flash card and a USB flash drive. It does not need a card reader to read from or write to thus making it the perfect storage medium for all types of digital devices. PQI's Intelligent Stick consumes minimum power and its minute dimensions makes it easy to store.
PAGE 5
Intelligent Stick™ 4. Block Diagram Program ROM 8051 Micro Controller Program RAM Flash Control Logic DMA Data / Flash Memory Address Bus EDC/ ECC USB2.0 USB 2.0 USB1.1 Host USB2.0 or 1.1 Port DATA RAM Interface PLL, REG CLK PWR_GOOD PWR_RST 5. Absolute Maximum Ratings Symbol Tstorage Ta Parameter Storage Temperature Ambient Operating Temperature Min Max Unit -20 75 ℃ 0 65 ℃ Vcc3 3.3V Supply Voltage -0.3 3.6 V Vcc18 1.8V Supply Voltage -0.3 2 V Vin3.3 3.
PAGE 6
Intelligent Stick™ 6. DC Characteristics Symbol Parameter Min. Max. Unit VIH_TTL TTL Input High Voltage 2 Vcc3+0.3 V VIL_TTL TTL Input Low Voltage -0.3 0.8 V VOH_TTL TTL Output High Voltage VOL_TTL TTL Output Low Voltage IOH_TTL TTL Output High Current IOL_TTL TTL Output Low Current VIH_USB USB Input High Voltage for Low-/full-speed VIL_USB USB Input Low Voltage for Low-/full-speed 0.9 X Vcc3 Notes V 0.45 -4 V mA 4 2.0 mA V 0.
PAGE 7
Intelligent Stick™ 7. Recommended Operating Conditions Symbol Vcc33 Vin Vcc25 Parameter Power Supply Voltage Input Voltage Internal Power Support Min. Typical Max. Units 3.0 3.3 3.3 V 0 Vcc Vcc+0.3 V 2.25 2.5 2.75 v 8. Pin Assignments Pin No. Pin Name Function 1 VCC 2 USB D- USB differential signal 3 USB D+ The pairs are used to transmit Data/Address/Command 4 VSS USB power input Ground 1 Rev. A.
PAGE 8
Intelligent Stick™ 9. Physical Specifications 9.1 Dimensions: 9.1.1 Height: 43mm 9.1.2 Width: 18mm 9.1.3 Depth: 2.8mm 9.1.4 Weight: 2.7g ± 0.5g 9.2 Outline of top view Rev. A.