User Manual

39
For ordering information, contact your 3M Sales Representative
Standard Operating Procedures
Product List
Truck Detailing
3M
™
Trizact
™
Hookit
™
Clearcoat Sanding Disc,
6 in., P1500, PN 02088
3M
™
Purple Finishing Film Hookit
™
Disc, 6 in., P1500, PN 30667;
P2000, PN 30666
3M
™
Trizact
™
Hookit
™
Foam
Disc, 6 in., 3000, PN 02085;
6 in., 5000 grit, PN 30662
Festool D150 Thin Interface
Pad, PN 29939
3M
™
Perfect-It
™
EX Rubbing
Compound, 1 qt., PN 36060
3M
™
Perfect-It
™
Foam
Compounding Pad,
Double Sided, Quick
Connect, 9 in., PN 05706
3M
™
Perfect-It
™
Foam Polishing
Pad, Double Sided, Quick
Connect, 9 in., PN 05707
3M
™
Perfect-It
™
EX Machine
Polish, 1 qt., PN 06094
3M
™
Quick Connect Adaptor,
14mm. Thread, PN 33271
3M
™
Perfect-It
™
Low Linting
100% Wool Compound Pad,
Double Sided, Quick Connect,
PN 33279
3M
™
Inspection Spray,
1 gallon, PN 06082
3M
™
Perfect-It
™
EX
Ultrane Machine Polish,
1 qt., PN 06068
3M
™
Perfect-It
™
Ultrane
Foam Polishing Pad, Double
Sided, Quick Connect, 9 in.,
PN 05708
3M
™
Perfect-It
™
Detail Cloth,
PN 06016; PN 06020
3M
™
PPS
™
SUN GUN
™
II
Light Kit, PN 16550
3M
™
Perfect-It
™
Clean
and Shine, 16 . oz. bottle,
PN 06084
Paint Finishing: Large Areas
1
Initial Defect Removal Texture Match
DA sand the repair area with a P1500/P2000
3M
™
Purple Finishing Film Hookit
™
Disc or P1500
3M
™
Trizact
™
Clearcoat Sanding Disc used damp.
Remove all paint defects and match texture to
adjacent OEM panels. Wipe panel clean.
2
Scratch Renement 3000
Rene the P1500/P2000 scratches with a DA
and a 3000 3M
™
Trizact
™
Hookit
™
Foam Disc
used damp with a 3M
™
Hookit
™
Soft Interface Pad.
Wipe panel clean.
3
Scratch Renement 5000 (Optional)
To reduce your bung time rene the 3000
scratches with a DA and a 5000 grit 3M
™
Trizact
™
Hookit
™
Foam Disc used damp with a 3M
™
Hookit
™
Soft Interface Pad. Wipe panel clean. The use of
3000 is required prior to 5000 for best results.
4
Compound
Compound the repair area with a high speed
polisher set between 1200–2000 RPM. For faster
results, use a foam compounding pad and the
appropriate rubbing compound. To insure all sand
scratches have been removed, inspect the surface
by spraying with an Inspection Spray and wipe
clean with a yellow microber cloth.
5
Machine Polish
Polish the repair area with a high speed polisher
set between 1200–2000 RPM. Use a black foam
polishing pad and the appropriate machine polish.
Wipe the panel clean with a yellow microber cloth.
6
Ultrane Machine Polish
Polish the repair area with a high speed polisher
with the speed set between 1200–2000 RPM.
Use a blue foam polishing pad and the appropriate
ultrane machine polish. Leave a light lm of the
polish on the panel and wipe clean with a blue
microber cloth.
7
Final Detail
Remove any masking material from the repair
area and clean any residual sling from adjacent
panels and door jamb areas. Cleaning the panel
immediately after compounding and polishing
will greatly improve the ease of cleaning. Inspect
the surface using the 3M
™
PPS
™
SUN GUN
™
II
Light Kit.
Visit 3MCollision.com for more SOPs and videos
Think About Your Health
3M
™
E-A-R
™
Skull Screws
™
Ear Plug, PN P1300
3M
™
Virtua
™
CCS Protective
Eyewear with Foam Gasket,
PN 11872
3M
™
Half Facepiece
Respirator, PN 07182
Not a complete list. Select protective eyewear, appropriate
gloves, hearing protection, respirator and protective
clothing based on your job and exposure assessment.