Warranty

ManualsBrandsPPI ManualsPlumbing1-1/2 in. x 3 in. Cap Tighting Jig

ONE-STEP SOUNDPROOF DWV COMPRESSION FITTINGS

INSTALLATION INSTRUCTIONS

Cut pipe straight

Cutting

Using a soft cloth wipe clean inside and

outside of both pipe and compression fitting.

Cleaning

Using our customized Cap Tightening Jig,

tighten cap with only one half turn.

To disconnect, loosen tightening cap

and simply pull pipe and fitting apart.

(Cap Tightening Jig Sold Separately)

10 YEAR LIMITED WARRANTY

PPI America warrants this product against defects in material or workmanship for a period of 10 years from the date

of purchase.

PPI America’s sole obligation under this warranty is to repair or, at its option, replace the defective part. The customer

shall have no other remedy.

PPI America’s One-Step Soundproof DWV Compression Fittings are for indoor use only.

This warranty shall be voided by alterations of product, tampering with, improper installation or maintenance,

accident or misuse.

This warranty is made expressly in lieu of all of all other warranties, expressed or implied, including any implied

warranties regarding merchantability or fitness for a particular purpose.

No employee, agent, franchise, dealer, or other pers

on is authorized to give any warranties of any nature on behalf of

PPI America. Except as provided here in, PPI America shall have no liability or responsibility to customer or any other

person or entity with respect to any liability, loss, or damage caused or alleged to be caused directly or indirectly by

the product.

Notwithstanding the above limitations and warranties, PPI America’s liability here under for damages incurred

by customer or others shall not exceed the amount paid by customer for the particular product involved.

* For Drain, Waste and Vent Applications. Not For Pressure

Clean edge of pipe as any existing burrs

can cause damage to the gasket, resulting

in leakage.

Surface Treatment

Mark insertion depth on pipe using table below.

Insert pipe straight into compression fitting

without removing tightening cap or gasket.

Make sure gasket is in the correct position

prior to inserting pipe.

Pipe Insertion Process

Pipe Size(inch)

1 ½

1 ¼

1 ⅜

2 ½

Insertion

Depth(inch)

Tightening Procedure

1480 Renaissance Dr. Suite 412 Park Ridge, IL , 60068

T 224 500 4078 www.ipvcpipe.com

Summary of content (2 pages)

PAGE 1
ONE-STEP SOUNDPROOF DWV* COMPRESSION FITTINGS INSTALLATION INSTRUCTIONS 1 Cutting Cut pipe straight 2 Surface Treatment Clean edge of pipe as any existing burrs can cause damage to the gasket, resulting in leakage. 3 Cleaning 4 Pipe Insertion Process Using a soft cloth wipe clean inside and outside of both pipe and compression fitting. Mark insertion depth on pipe using table below. Insert pipe straight into compression fitting without removing tightening cap or gasket.
PAGE 2
CONEXIONES DE COMPRESIÓN INSONORIZADAS PARA TUBERÍAS DWV* DE UN PASO INSTRUCCIONES DE INSTALACIÓN 1 Corte Haga un corte recto en la tubería. 2 Tratamiento de superficies Limpie el borde de la tubería eliminando cualquier irregularidad que podría dañar la empaquetadura y generar filtraciones. 3 Limpieza 4 Proceso de inserción de la tubería Con un paño suave, limpie la tubería y la conexión de compresión por dentro y por fuera.