Use and Care Manual

PPG Ceiling Paint Interior Paint + Primer
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
PPG Ceiling Paint is an interior paint primer in one that is formulated
to make your ceiling paint projects easier and faster - in one coat*.
The low spatter formula leads to a low mess application and minimal
cleanup. It is low odor, low VOC all backed by a Lifetime Guarantee.
Ideal for use on properly prepared, interior ceilings where a durable,
premium-quality, flat finish is desired.
*One coat coverage only when tinted to colors specified for PPG
Timeless Interior Paint + Primer.
Concrete
Concrete/Masonry Block
Plaster
PRODUCT TYPE: 100% Acrylic
SHEEN: Flat, 0-3 @ 60º
VOLUME SOLIDS: 32% +/- 2%
WEIGHT SOLIDS: 52% +/- 2%
VOC: <50 g/L (0.4 lbs./gal.)
WEIGHT/GALLON: 11.8 lbs. (5.3 kg) +/- 0.2 lbs. (91 g)
COVERAGE: Approximately 300 to 400 sq. ft. (28 to 37 sq. meters)
per U.S. gallon (3.78 L) on primed, smooth, nonporous surfaces.
Coverage figures do not include material loss due to surface
irregularities and porosity, or material loss due to application method or
mixing.
Some colors, drastic color changes, or porous surfaces may require
more than one coat to achieve a uniform finish.
Wet Film Thickness: 4.0 mils to 5.3 mils
Wet Microns: 102 to 134
Dry Film Thickness: 1.2 mils to 1.6 mils
Dry Microns: 30 to 40
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 1 hour
To Recoat: 4 hours
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement.
Wait at least 30 days after painting before cleaning the surface with a
non-abrasive, mild cleanser. Very deep colors may require longer to
fully cure.
CLEANUP: Clean brushes and tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
PPG83-610 Ceiling White
PPG83-610
PPG83-610
Complete one coat coverage*•
True Flat Finish Hides Minor Imperfections•
Stain Blocking•
Low Spatter, Low Mess Application•
Low Odor, Low VOC•
*One coat coverage only when tinted to colors specified for PPG
Timeless Interior Paint + Primer.
LIMITATIONS OF USE
FOR INTERIOR USE ONLY. Apply when air, product and surface
temperatures are between 50ºF (10ºC) and 90ºF (32ºC). USE WITH
ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN.
Read all label and Safety Data Sheet (SDS) information prior to use.
SDS are available through our website or by calling 1-800-441-9695.
Not recommended for use on floors or in high humidity areas.
PROTECT FROM FREEZING.
PACKAGING
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products are available in all sizes.
Read Label and Safety Data Sheet prior to use. See other cautions on last page.