SDS

PPG4015 PPG TIMELESS WOOD FINISH & SEALANT IN ONE SATIN SEMI-
TRANSPARENT - HONEY PINE
Product name
1
Product code
Date of issue
Version
00387533
18 October 2016
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Do not store above the following temperature: 35°C (95°F). Store in accordance with
local regulations. Store in a segregated and approved area. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Eliminate all ignition
sources. Separate from oxidizing materials. Keep container tightly closed and sealed
until ready for use. Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination.
:
:
any other ignition source. Use explosion-proof electrical (ventilating, lighting and
material handling) equipment. Use only non-sparking tools. Take precautionary
measures against electrostatic discharges. Empty containers retain product residue
and can be hazardous. Do not reuse container.
Special precautions
:
Ingestion of product or cured coating may be harmful. Vapors may accumulate in low or
confined areas or travel a considerable distance to a source of ignition and flash back.
Vapors are heavier than air and may spread along floors. Materials such as cleaning
rags, paper wipes and protective clothing, which are contaminated with the product may
spontaneously self-ignite some hours later. To avoid the risks of fires, all contaminated
materials should be stored in purpose-built containers or in metal containers with tight-
fitting, self-closing lids. Contaminated materials should be removed from the workplace
at the end of each working day and be stored outside. If this material is part of a
multiple component system, read the Safety Data Sheet(s) for the other component or
components before blending as the resulting mixture may have the hazards of all of its
parts.
Distillates (petroleum), hydrotreated light
ACGIH TLV (United States, 3/2015).
Absorbed through skin.
TWA: 200 mg/m³, (as total hydrocarbon
vapor) 8 hours.
Solvent naphtha (petroleum), medium aliph.
ACGIH TLV (United States).
TWA: 400 ppm
OSHA PEL (United States, 2/2013).
TWA: 100 ppm 8 hours.
TWA: 400 mg/m³ 8 hours.
Stoddard solvent
ACGIH TLV (United States, 3/2015).
TWA: 525 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
OSHA PEL (United States, 2/2013).
TWA: 2900 mg/m³ 8 hours.
TWA: 500 ppm 8 hours.
Section 8. Exposure controls/personal protection
Ingredient name
Exposure limits
Control parameters
Occupational exposure limits
United States
Page: 6/16