Installation Instructions

Thickness
Type
Non-Vented
Non-Vented
Vented or Non-Vented
Vented or Non-Vented
Vented or Non-Vented
¼”
(6 mm)
4’ (1.22 m)
Width
Length Weight
Packing
PACKAGING:
MaxiSOFFIT
TM
is delivered in full pallets.
12” (0.30 m)
16” (0.41 m)
24” (0.61 m)
8’ (2.44 m)
10’ (3.05 m)
12’ (3.66 m)
8’ (2.44 m)
62.5 lb (28.4 kg)
78.1 lb (35.5 kg)
23.4 lb (10.6 kg)
31.3 lb (14.2 kg)
31.3 lb (14.2 kg)
60 pieces/pallet
50 pieces/pallet
240 pieces/pallet
180 pieces/pallet
120 pieces/pallet
CUTTING:
 If power-sawing, use carbide- or diamond- tipped blade. Position cutting
station so that wind will blow dust away from user and others in working
area.

Only use power cutting tools in well ventilated areas.
 Use NIOSH approved respirators and goggles for protection when power-
sawing.
 For score-and-snap cutting, use a carbide-tipped scoring tool.
 Snapper tools and shears can also be used.
 Round openings can be made by drilling several holes around
circumference of the desired opening and tapping out the
center.
 NEVER use a power saw indoors.
 NEVER dry sweep. Use wet suppression or HEPA vacuum.
Scoring Tool To scratch Score-and-Snap
Round Openings
Circular Saw
Carbide or Diamond
Tip Blade
Always Use Protection
Wipper Snapper
TM
Snapper Shear
TM
MAXITILE siding products contain respirable crystalline silica, which is known to the State of California to cause cancer and is considered
by IARC and NIOSH to be a cause from some occupational sources. Breathing excessive amounts of respirable silica dust can also cause a
disabling and potentially fatal lung disease called silicosis, and has been linked with other diseases. Some studies suggest smok
ing may in-
crease these risks. During installation or handling: (1) work in outdoor areas with ample ventilation; (2) use
ber-cement shears for cutting or,
where not feasible, use a dust-reducing circular saw attached to a HEPA vacuum; (3) warn others in the immediate area; (4) wear a properly-
ted, NIOSH-approved dust mask or respirator (e.g. N-95) in accordance with applicable government regulations and manufacturer instruc -
tions to further limit respirable silica exposures. During clean-up, use HEPA vacuums or wet methods, never dry sweep. For further informa-
tion, refer to our installation guides and Material Safety Data Sheet available at www.maxitile.com or by calling [phone] . FAILU
RE TO
ADHERE TO OUR WARNINGS, MSDS, AND INSTALLATION GUIDES MAY CAUSE SERIOUS PERSONAL INJURY OR DEATH.
2 MaxiSOFFIT
TM
| www.maxitile.com
 Using a straight edge as a guide, carefully draw the scoring
tool up and down several times. Bend
upwards and break.
WARNING: AVOID BREATHING SILICA DUST.