Operation Manual

3. Operation
UP! 3D Printer User Manual 46
Regularly check your nozzle height! It can change for a number of reasons,
some of which you may not even be aware of. To check your nozzle height,
refer to section 3.3.2
To get the best results out of your Up printer, the print platform must be
perfectly lined up with the Nozzle. This means that when you set the nozzle
height, it should be exactly the same distance from the nozzle at all four
corners, and the center, of the print platform. If this is not the case, please
follow the ―leveling the print platform‖ procedure listed in 3.3.3