Operation Manual

3. Operation
UP! 3D Printer User Manual 36
(Windows version)
(Mac version)
Print Options:
Speed: Fine, Normal or Fast. This simply determines the speed at which the
printer moves. As a general rule, the slower you print, the better the quality of
the parts. For tall parts, running at Fast speed can be problematic as the
printer can vibrate to the extent that print quality is affected. For large surface
area parts, the Fine setting can be problematic as the printer takes longer to
print the part and the corners are therefore more likely to lift a little bit.
UnSolid Model: This function is useful for printing STl files that are not perfect.
A perfect STL file is a fully enclosed surface, with no holes in the surface skin,
and no overlapping surfaces. If your file is not perfect, this option should allow
you to print it anyway.