Operation Manual

3. Operation
UP! 3D Printer User Manual 34
Area: The surface area above which support material gets used. When you
choose 5mm
2
, for example, there will be no support if the overhanging area is
less than 5mm
2
. Benefit? A little material is saved and a slightly faster print
speed is achieved.
Other Options
Stable Support: Stable support creates support that is more solid, and the
model is less likely to distort, but the support material is then more difficult to
remove.
Tip: All setup and configuration settings are stored in the Up Software, not on
the Up Printer. This means that, if you change to a different computer, you
will need to repeat all the calibration and setup procedures.