Operation Manual

3. Operation
UP! 3D Printer User Manual 32
The part has an outer wall thickness of solid plastic
(about 1.5mm), but its interior is filled with a reasonably
small scaffold structure. On previous software version
this was referred to as ―Loose‖
The part has an outer wall thickness of solid plastic
(about 1.5mm), but its interior is filled with a medium
spaced scaffold structure. On previous software version
this was referred to as ―Hollow‖
The part has an outer wall thickness of solid plastic
(about 1.5mm), but its interior is filled with a large
spaced scaffold structure. On previous software version
this was referred to as ―Big hole‖
Support Options
Dense: This represents how many layers of ‗solid‘ (dense) material form part
of the support structure directly beneath the model.