Operation Manual

3. Operation
UP! 3D Printer User Manual 30
3.3.6 Print Setup Options
Click menu ―3D Print->Setup‖. The following dialog box pops up:
Print Options
Z Resolution: Sets the print resolution (layer thickness) of the printer. This can
be between 0.2mm per layer to 0.4mm per layer (depending on the printer
model).
Optimize: Disabled.
Height Options
Base: This is the thickness of the raft of material before the support layer is
printed under the part. When the printer starts printing, it first prints a raft of
non-solid material in which all the lines of support material are horizontal
(along the Y axis). It keeps building up horizontal rows of support material for
as many mm as you have chosen. Then, just before it gets to the bottom
surface of the real part, it starts to build support layers perpendicular to the raft
layers layer.
(Mac version)
(Windows version)