Operation Manual

3. Operation
UP! 3D Printer User Manual 19
Rotating the model: Click the ―Rotate‖ button on the toolbar, choose or input
how many degrees you want to rotate in the text box, then choose the axis to
rotate around.
For example: Rotate the model around Y axis by 30
o
.
Procedure: 1. Click ―Rotate‖; 2. Input 30 in the text box；3. Click ―Y axis‖.
Note: positive numbers rotate counterclockwise and negative numbers rotate
clockwise.
Scaling the model: Click ―Scale‖, choose or input a scaling factor in the text
box, and then either scale the model uniformly by clicking the scale button
again, or choose the axis around which you want to scale if you only want to
scale in one direction.
Example1: Scale up the model uniformly by 2.0 times.
Procedures: 1. Click ―Scale‖; 2. Input 2.0 in the text box; 3. Click ―Scale‖ again.
Example2: Scale up the model by 1.2 times along the Z axis only.
Procedures: 1. Click ―Scale‖; 2. Input 1.2 in the text box; 3. Click ―Z axis‖