User manual

UP Mini
3D Printer User Manual
including the raft and any suppo
The price as 6/10
/12 for ABS plastic from
working out to be 0.06
cents per gram.
5. Model
Removal
When the model ha
s finished
heating.
Open the door, remove the clips and s
Slide
the spatula under the model and slowly wiggle it back and forth to pry loose the model.
TIP: Remember to u
se gloves
gloves must be worn.
CAUTION: It is strongly recommended that you
remove the model from the
3D Printer User Manual
including the raft and any suppo
rt material.
/12 for ABS plastic from
www.3DPrintingSystems.com
was AU$59 per 1KG
cents per gram.
Removal
s finished
printing, the printer will beep, and the
nozzle and platform stop
Open the door, remove the clips and s
lide the Perfboard out from the
printer platform
the spatula under the model and slowly wiggle it back and forth to pry loose the model.
se gloves
as the platform and model may still be hot.
The spatula is sharp,
CAUTION: It is strongly recommended that you
wear
safety glasses and
remove the model from the
Perfboard
or the support material from the model
40
was AU$59 per 1KG
nozzle and platform stop
printer platform
.
the spatula under the model and slowly wiggle it back and forth to pry loose the model.
The spatula is sharp,
safety glasses and
gloves to
or the support material from the model
.