User manual

UP Mini
3D Printer User Manual
3.3.6 Print
Preferences
Click menu “3D Print-
>Setup
box opens:
Recommended Settings
in red
pending on the model you are printing.
Windows version Mac version
Z Resolution:
Sets the print
resolution (layer
0.4mm per layer. The finer
the layer thickness, the better quality, the stronger the printed part and
the longer it takes to print.
Fill:
There are four
types of honeycomb
ages show the four different internal fill types.
3D Printer User Manual
Preferences
>Setup
” or Click “print” and select “Preferences’ and t
he following dial
in red
and in most cases are the only values that require changing d
pending on the model you are printing.
Windows version Mac version
resolution (layer
thickness)
of the printer. This can be between 0.2
the layer thickness, the better quality, the stronger the printed part and
types of honeycomb
fill that the interior of parts are made of.
These cut away i
ages show the four different internal fill types.
Solid Honeycomb: The p
art is made
plastic, which gives you the strongest part
longer print time
. This setting is recommended for
strong and functional parts.
Semi-Solid Honeycomb
33
he following dial
og
and in most cases are the only values that require changing d
e-
of the printer. This can be between 0.2
mm per layer to
the layer thickness, the better quality, the stronger the printed part and
These cut away i
m-
art is made
of nearly solid
plastic, which gives you the strongest part
with a
. This setting is recommended for