User manual

UP Mini
3D Printer User Manual
Move the mouse pointer onto
presented in a
floating window, as
(Windows version)
TIP:
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
for more information.
Unloading the model: click
the
load” on the toolbar or click
the
appear. C
hoose unload the model or
want to remove all of them).
Saving the model: C
hoose the model, then
size is 12%~18% of the original STL
transfer files.
Note on STL files:
For a model to print correctly, all the faces of the models need to have their
normal facing outwards. The U
The default colour used by the software when opening a model is a light grey/pink co
normals
are facing the wrong way, then the model is coloured in red.
or saving it as an UP3 file and reopening it.
3D Printer User Manual
the model, and click the left mouse key. Some m
odel
floating window, as
shown below:
(Mac version)
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
the
left mouse button on the model to select it
(Pink)
the
right mouse button while over the model
and a context menu will
hoose unload the model or
unload all model
s (if you have more than one file open and
hoose the model, then
click “Save”. The file is saved in
UP3 format
size is 12%~18% of the original STL
file. This is a convenient format
for users to
For a model to print correctly, all the faces of the models need to have their
normal facing outwards. The U
P software uses colour Red to indicate a
problem with a
The default colour used by the software when opening a model is a light grey/pink co
are facing the wrong way, then the model is coloured in red.
Try fixing it with the Fix tool
or saving it as an UP3 file and reopening it.
25
odel
information is
(Mac version)
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
(Pink)
, and click “Un-
and a context menu will
s (if you have more than one file open and
UP3 format
and its
for users to
archive or
For a model to print correctly, all the faces of the models need to have their
problem with a
model.
The default colour used by the software when opening a model is a light grey/pink co
lour. If the
Try fixing it with the Fix tool