Operation Manual

7. Tips & Tricks
UP! mini 3D Printer User Manual 52
7. Tips & Tricks
How to print a large part?
Large parts can sometimes have their corners warping from the print platform,
which can cause the part to distort. This is caused by uneven temperature
across the surface of the platform. Preheating the platform before printing
large parts is essential to minimize the warping. Also, the faster you can print
such parts, the less lifting you are likely to get. Here are some other tips to
increase print quality:
 If possible, try to avoid printing such large parts in solid mode.
 Set the layer resolution to as high as you can get away with.
 Print the part in “Fast” mode.
Check Your Nozzle Height Regularly!
Nozzle height can change for a number of reasons, some of which you may
not even be aware of. To check your nozzle height, please refer to section
3.3.2