Operation Manual

3. Operation
UP! mini 3D Printer User Manual 29
TIP: If you happen to crash the platform into the nozzle while making height
adjustment, it is good practice to re-initialize the printer before
undertaking any other operations.
3.3.4 Other Maintenance Options
Click “Maintain” on the “3D Print” menu, and the following dialog box pops up:
(Windows version)
(Mac version)
Figure 3-25 Maintenance Dialog
Extrude: Extrudes material out of print nozzle. Click on this button, and the
nozzle is heated. When the temperature of nozzle reaches 260°C, the printer
beeps, then, if there is filament already inside the print head, the temperature
in nozzle causes the filament to melt, and print head starts extruding the