User's Guide

7
Search and connect to the internal Wi-Fi network①
Log in to RTAP2U Viewer②
Establish connection with an external Wi-Fi network③
The following steps (1) through (6) illustrates how to access the RTAP2U Viewer,
connect to the external Wi-Fi network, and receive RTCM messages.
※ This document is based on firmware (v1.1.0_kernel.fw), made in September, 2021.
(1) Connect to the internal Wi-Fi (AP Mode)
<Desktop>
When connecting to the network by a desktop, follow the two steps below. Also note
that the images may differ depending on the user’s PC type, operating system, and
settings.
① R2U-B11-XXXX will appear on the Wi-Fi list.
② Click on it and allow a few seconds to pair.