User's Guide

27
(3) Upload the firmware
① Click Config on the RTAP2U Viewer bottom bar and select SYSTEM on the
top bar.
② Click UPLOAD FIRMWARE and choose the latest firmware file. This may take up
to three minutes depending on the network environment.
③ After a green notice “SUCCESS FW Version: XXXX.” pops up on the top right,
close the RTAP2U Viewer window.
(4) Reboot the receiver
The receiver automatically starts rebooting once the firmware is uploaded. It takes
about one to two minutes to reboot.
Step Description
① Rebooting (1~2 minutes)
② Booting complete