User's Guide

23
2.5 Managing Log Files
STOP & GO tab is used to log coordinates for a short period. When logging
coordinates for long intervals, users can set the length of the interval through the
SYSTEM LOG tab. The log files are saved in the RTAP2U internal memory and can
be downloaded.
2.5.1 STOP and GO logging
① Click Log on the RTAP2U Viewer bottom bar and select STOP & GO on the top
bar.
② Real-time logging is visible in the NMEA panel. Click CLEAR to remove logs in
the NMEA panel and FREEZE to pause logging.
③ Enter the log file name using File Prefix in the Setting section. Click START to
start saving coordinates. It will be saved in an NMEA format. The elapsed time is
shown in the Time Logged section. Click SAVE to stop logging and the NMEA
file will be downloaded in a .txt format.