User's Guide

13
2.3 Receiving RTCM Messages
RTAP2U can receive RTCM messages through NTRIP or TCP/IP. After connecting
RTAP2U to the external Wi-Fi network, RTCM message reception and precision
positioning are possible through the settings illustrated in the following steps.
(1) Enter server information for correction messages
<Using NTRIP>
① Click Config on the RTAP2U Viewer bottom bar and select RTCM on the top bar.
② Tap on NTRIP as the Connection Type.
③ Enter your NTRIP server information in the NTRIP Server Setting section.
Information to fill out are as the following:
 Server Address: NTRIP server address
 Server Port: Server port number
 Stream: Mount information
 User ID: Enter when necessary
 Password: Enter when necessary
④ Click SUBMIT after entering the information. The following image is for reference.
⑤ A green notice “Submission was successful.” will pop up on the top right of
RTAP2U Viewer.