User's Guide

12
Click Info on the RTAP2U Viewer bottom bar and select DEVICE on the top bar. If
the Station IP wlan0 under General Info is 0.0.0.0, it indicates that the external
network is not connected. The network is connected if a valid IP address is visible
as the above image.
You have completed the initial device setting. There is no need to repeat the steps
after this. To access the RTAP2U Viewer later on, users have to first connect to the
internal Wi-Fi (R2U-B11-XXXX) and enter 192.168.73.1:5000 on the web browser.