User's Guide

10
(5) Connect to the external network (Station mode)
The Station mode should be set up through RTAP2U Viewer to connect to an
external network.
① Click Config on the bottom bar and select WI-FI on the top bar.
② Enter the Wi-Fi name (SSID) and password (Security Key), and then click
SUBMIT. The image below is an example.
Note※
 Connection with a 5G network is not available, so please use a 2.4G network.
 If there is a special character other than “_” included in the SSID, the receiver
may not be able to connect to the external network.