Specification Sheet

MIMO-3-V2-15
MIMO-3-V2-15
©2018 Poynting Antennas (Pty) Ltd. All rights reserved
Product Specifications may change without prior notice
Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015
Document version: TS-MIMO-0003-V2-15 REV2
www.poynting.tech
Revised: August 2018
Electrical Specifications - Cellular
Frequency bands:
410-470 MHz
690-960 MHz
1710-2700 MHz
3400-3800 MHz
Gain (max) Port 1 & 2:
5.8 dBi
VSWR Port 1 & 2:
≤2.5:1
Feed power handling:
10 W
Input impedance:
50 Ohm (nominal)
Polarisation:
Linear Vertical
Coax cable loss:
0.35 dB/m @ 900 MHz
0.53 dB/m @ 2000 MHz
0.6 dB/m @ 2500 MHz
0.72 dB/m @ 3500 MHz
Path to Ground:
Yes
GPS/Glonass Antenna Electrical Specifications
Frequency Range (GPS):
1575.42MHz/1600MHz
Gain (Max):
21+/-2dBi
VSWR:
≤1.5:1
DC Voltage:
2.7-3.3 V
DC Current:
5-15mA
Noise Figure:
≤1.5 dB
Nominal Impedance:
50 Ω
Polarisation:
RHCP
Filter Out Band Attenuation:
12dB Min f0+50MHz,
16dBi Min f0-50MHz
Cable:
0.04m Micro Cable 1.13
Connector:
SMA male
Voltage:
2.7 - 3.3V
Max. Power-W:
50
Wi-Fi Electrical Specifications
Frequency:
2400-2500 MHz
5000–6000 MHz
Gain (Max):
7 dBi
VSWR:
≤2.5:1 over 95% of the band
Feed power handling:
10 W
Nominal input impedance:
50 Ohm (nominal)
Polarisation:
2 x Vertical linear
Coax cable loss:
0.6 dB/m @ 2500 MHz
0.72 dB/m @ 3500 MHz
0.981 dB/m @ 5800 MHz
Path to Ground:
Yes
Coax Cable & Connector Type -Cellular & Wi-Fi
Cable length:
2m ±5%
Coax cable type:
Twin HDF 195
Connector type:
SMA (Male)
Coax Cable & Connector Type - GPS
Cable length:
2m ±5%
Coax cable type:
RTK-031
Connector type:
SMA (Male)
*The coax cables & connectors are factory mounted to the antenna
Product Box Contents
Antenna:
A-MIMO-0003-V2-15
Mounting bracket:
Threaded Spigots (Up to 60mm
clamping thickness), Adhesive Surface
Mounting & Optional Magnetic Mount
Adapters:
RPSMA(m) To SMA (f)
Ordering Information
Commercial name:
MIMO-3-V2-15
Order product code:
A-MIMO-0003-V2-15
EAN number:
0707273470263
Mechanical Specifications
Product dimensions
253 mm x 128 mm x 144 mm
Packaged dimensions:
265 mm x 211 mm x 204 mm
Weight:
1.36 kg
Packaged weight:
1.46 kg
Radome material:
UV Stable SAN Marine ASA
Radome colour:
Brilliant White, Pantone P 179-1 C
Mounting Type:
Spigot, Surface with Magnetic mount option
Environmental Specifications, Certification & Approvals
Wind Survival:
<220 km/h
Temperature Range
(Operating):
-40°C to +80°C
Environmental Conditions:
Outdoor/Indoor
Water ingress protection
ratio/standard:
IP 68
Salt Spray:
MIL-STD 810F/ASTM B117
Operating Relative Humidity:
Up to 98%
Storage Humidity:
5% to 95% - non-condensing
Storage Temperature:
-40°C to +80°C
Flammability Rating:
UL 94-HB, ECE-R118.02 Certified cables
Impact resistance:
IK 10
Product Safety &
Environmental:
Complies with CE, EN, CSA, RoHS and
IEC standards