User Guide

19
Revision 4.0
Optional magnetic mount with magnetic base kit
(A-MBK-003 -Not Provided). For temporary and
low mobility installations.
• Clean the entire surface on which you plan to
place the antenna. Alcohol wipes can be used
to remove oil and dirt from the surface.
• Remove nut, spigot mount foam seal and
spigot from antenna.
• Secure the magnetic base adapters and
magnets from the MBK-3 to the antenna using
the screws provided with the MBK-3.
• Peel off the wax paper on one side of the
magnet mount foam seal and paste the seal
onto the bottom antenna surface.
• Place antenna onto magnetic surface.
• Route the cable as required.