Specification Sheet

Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2008
Document version: TS-A-WLAN-0060_V1
www.poynting.tech
WLAN-60
©2015 Poynting Antennas (Pty) Ltd. All rights reserved.
Product Specications may change without prior notice
Revised: March 2017
Electrical Specications
Frequency Bands: 2400 - 2500 MHz
3300 - 3800 MHz
5000 - 6000 MHz
Gain (Max): 18 dBi
VSWR: <2.5:1
Feed Power Handling: 10 W
Input impedance: 50 Ohm (nominal)
Polarisation: Linear Vertical
Path to ground: Yes
Cable Lenght: N/A
Cable Type: N/A
Connector: SMA Female
Environmental Specications
Wind Survival: 160km/h
Temperature Range (Operating): -40°C to +70°C
Environmental Conditions: Outdoor/Indoor
Operating Relative Humidity: Up to 98%
Storage Humidity: 5% to 95% - non condensing
Storage Temperature: -40°C to +70°C
Mechanical Specications
Product Dimensions (L x W x D): 240 mm x 240 mm x 60 mm
Packaged Dimensions: 260 mm x 280mm x 80mm
Weight: 760.6g
Packaged Weight: 1334.8g
Radome Material: ABS (Halogen Free)
Radome Colour: Cool Gray (1C)
RAL 7047
Ordering Information
Commercial name: WLAN-60
Order Product Code: A-WLAN-0060-V1
EAN number: 0707273469571
Product Box Contents
Antenna: A-WLAN-0060-V1
Mounting Bracket: Cast aluminium swivel bracket
The cable and connector is factory mounted to the antenna
Additional Accessories Available
Extension Cables: None
Contact Poynting
Poynting Antennas (Pty) Ltd - Head Ofce
Unit 4, N1 Industrial Park
Landmarks Avenue,
Samrand, 0157
South Africa
Phone: +27 (0) 12 657 0050
E-mail: sales@poynting.co.za
Poynting Europe
Regus Business Center Neue Messe Riem
Kronstadter Straße 4
81677 München
Germany
Phone: +49 89 208026538
E-mail: sales-europe@poynting.tech
For more detailed information and availability in your region,
visit our web site: www.poynting.tech
Certication Approvals and Standards
Flammability rating: UL 94-V0
Water Ingress Protection Ratio/Standard: IP 65 (NEMA 4X)
Impact resistance: IK 08
Salt Spray: MIL-STD 810F /ASTM B117
Product Safety: Complies with UL, CE, EN,
CSA and IEC standards