Use and Care Manual

SAVE THESE INSTRUCTIONS
12
MAINTENANCE GUIDEMAINTENANCE GUIDE
WARRANTY
The manufacturer warrants to the original purchaser that products manufactured are free
from defects of workmanship and material, provided such goods are installed, operated and
maintained in accordance with written manuals or other instructions for a period of 1 year
from date of purchase on parts and workmanship. In case you as our customer, meet any
trouble with your machine, contact your Powr-Flite® representative who will be happy to be
of service to you and will take care of the warranty settlement.
NOTE: Alterations and changes made to the machine without written approval of the
manufacturer and use of unapproved spare parts will not be covered by warranty.
Motors not running
CAUSE: SOLUTION:
1) Power not reaching main switch. 1) Check power supply. Check fuses/circuit
breaker. Contact service center.
2) Defective power cord. 2) Contact manufacturer or service center.
3) Faulty switches or wiring. 3) Contact manufacturer or service center.
4) Blown fuse or tripped circuit breaker 4) Reset circuit breaker according to operating
instructions or replace fuse if qualified..
5) Problem with brushes, field windings,
or armatures. (vacuum or brush motor) 5) Repair or replace defective part.
Loss of vacuum suction
CAUSE: SOLUTION:
1) Vacuum head blocked. 1) Visually inspect and clear blockage.
2) Hoses blocked. 2) Visually inspect and clear blockage.
3) Recovery tank not sealed properly. 3) Check tank for damage or adjust
for proper fit.
Brush not functioning properly
CAUSE: SOLUTION:
1) Belt broken. 1) Replace belt.
2) Brush jammed. 2) Visually inspect and clear blockage.
3) Clutch bearing seized. 3) Contact manufacturer or service center.
Spray jet not functioning properly
CAUSE: SOLUTION:
1) Jet blocked 1) Visually inspect and clean according to
operating instructions.
2) Solution filter blocked. 2) Visually inspect and clean according to
operating instructions.
3) Pump head, valves or diaphram blocked 3) Contact manufacturer or service center.
or damaged.
4) Solenoid valve inoperative 4) Contact manufacturer or service center.
5 YEARS on
One Piece
Housing
2 YEARS on
Brush Motor
1 YEAR on
Parts & Our
Workmanship