Safety, Operation, and Maintenance Manual for SELF-CONTAINED CARPET EXTRACTORS Models PFX3S, PFX7S, PFX9S A Tacony Company Read and follow all instructions, warnings and cautions before using this self-contained extractor! 3101 Wichita Court • Fort Worth,TX 76140 X8470
READ ALL INSTRUCTIONS BEFORE USING! ongratulations on purchasing a Powr-Flite® selfcontained extractor. Given proper care, this product will afford you many years of trouble-free operation. All parts have passed rigid quality control standards before being assembled to produce the finished product. C Prior to packaging, the extractor is again inspected for assurance of flawless assembly. This unit is protectively packed to prevent damage in shipment.
IMPORTANT SAFETY PRECAUTIONS WARNING!: To reduce the risk of fire, electric shock, or injury WARNING To avoid electric shock, DO NOT expose to rain. Store Indoors. WARNING To avoid fire, DO NOT use with a flammable or combustible liquid to clean floor. When using this self contained extractor, basic precautions should always be followed, including the following: 1) DO NOT leave unit when plugged in. Unplug from outlet when not in use and before servicing.
NO PERMITE que se use como juguete. Ponga attencion cuando se use cerca de niños. USE SE SOLAMENTE de acuerdo a las instrucciones y con accesorios recomendados por el fabricante. NO USE con el cable o clavija dañados. Si la unidad ha sido golpeada, mojada, o dañada enalgun modo llame al centro de servicio o Powr-Flite®. NO JALE o carque del cable, no machuque el cable o lo estire sobre objetos filosos. NO USE la unidad sobre el cable. NO DESENCHUFE jalando el cable.
GROUNDING INSTRUCTIONS DANGER: Improper use of the grounding plug can result in a risk of electric shock. GROUNDING INSTRUCTIONS his self-contained extractor must be properly grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug.
GENERAL INSTRUCTIONS PRE-OPERATION INSTRUCTIONS FIG. 1C MASTER SWITCH VACUUM SWITCH ACCESSORY / BRUSH SWITCH CIRCUIT BREAKER NOTE: (color fastness) Before using carpet cleaning chemicals, test on an inconspicuous part of the carpet for color fastness. Place the solution on a small piece of clean white material or tissue, then rub the carpet vigorously. Excessive amounts of dye showing on the material would indicate that the SOLUTION SWITCH FIG.
GENERAL INSTRUCTIONS STORAGE WHEN CLEANING IS FINISHED: 1) Connect the drain hose (clipped to the handle) to the solution fitting at the back of the machine and place the other end into the waste tank, turn on the accessory switch. (FIG 1C) This will pump the remaining solution into the waste tank for easy drainage. 2) To disconnect the solution hose, push in on the ring of the solution fitting. (FIG 2) Switch off the machine, remove power plug from the socket, and empty the waste tank.
ILLUSTRATED PARTS LIST *NOTE - All tank parts except for solution tank and waste tank are interchangeable on all models. TANK ASSEMBLY • PFX4S shown ref # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 order # SC15 07028 31913 07305 07434 07433 SC16 X8437 07601 07437 SC20 07017 SC14 07019 10018 X8438 X8436 X8400 description Lid, clear, PFX4S, 7S & 9S Screw, M6, hex head.
CHASSIS ASSEMBLY PFX9S ref # 1 2 3 5 6 7 9 10 11 12 13 14 15 16 17 18 19 20 23 24 25 27 28 29 31 32 33 34 35 36 39 40 41 order # 08000 08488 07076 07003 31960 08005 07096 08105 30911 31960 32910 SC26 07007 07036 FD17 08409 65004 08403 07044 08459 91092 07037 08405 07230 07447 07046 08406 01052 08069 08472 07523 description Chassis body Cover, drive belt assembly Bracket, tank mount Screw, M6 hex HD x 10 Washer, M6 spring Screw, M6 x 10 C/SK slot HD Grommet, chassis Axle assembly, less wheel Screw, M6 x 16
CHASSIS & BASE ASSEM PFX4S & PFX7S ref # order # 1 07096 2 33063 3 07433 4 30934 5 07517 6 31913 7 31960 8 32910 9 1928 1937 10 07003 11 30911 12 07076 13 31913 14 07100 7750 15 16 07490 17 SC25 18 31913 19 07036 20 21 07105 22 07966 23 30911 24 31960 25 07096 26 07173 HANDLE & MOTOR ASSEMBLY PFX4S, PFX7S & PFX9S ref # 1 2 3 4 6 7 8 9 11 14 15 16 17 18 19 21 22 23 24 25 27 28 29 30 31 32 33 10 order # SC24 SC20 50027 SC10 07447 07047 23046 22027 22026 M1400C M1400E 07047 07447 07447 07047 07202 30934 31
MBLY um s 7S & 9S 4S plated w/ wheel) plated ose 7S ILLUSTRATED PARTS LIST qty.
MAINTENANCE GUIDE Motors not running CAUSE: 1) Power not reaching main switch. SOLUTION: 1) Check power supply. Check fuses/circuit breaker. Contact service center. 2) Contact manufacturer or service center. 3) Contact manufacturer or service center. 4) Reset circuit breaker according to operating instructions or replace fuse if qualified.. 2) Defective power cord. 3) Faulty switches or wiring. 4) Blown fuse or tripped circuit breaker 5) Problem with brushes, field windings, or armatures.
