OPERATOR’S MANUAL & PARTS LIST Self-Contained Carpet Extractor Model PFX3S WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. ©Tacony, Inc.
READ ALL INSTRUCTIONS BEFORE USING! Congratulations on purchasing a Powr-Flite self-contained extractor. Given proper care, this product will afford you many years of trouble-free operation. All parts have passed rigid quality control standards before being assembled to produce the finished product. If damage is discovered, immediately notify the transportation company that delivered your extractor. As a shipper, we are unable to report claims for concealed damage.
IMPORTANT SAFETY PRECAUTIONS WARNING!: To reduce the risk of fire, electric shock, or injury WARNING To avoid fire, DO NOT use with a flammable or combustible liquid to clean floor. WARNING To avoid electric shock, DO NOT expose to rain. Store Indoors. When using this self contained extractor, basic precautions should always be followed, including the following: 1. DO NOT leave unit when plugged in. Unplug from outlet when not in use and before servicing. 10.
GROUNDING INSTRUCTIONS DANGER: Improper use of the grounding plug can result in a risk of electric shock. GROUNDING INSTRUCTIONS This self-contained extractor must be properly grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug.
GENERAL INSTRUCTIONS PRE-OPERATION INSTRUCTIONS for PFX3S FIG. 1C VACUUM SWITCH SOLUTION LEVER BRUSH SWITCH SOLUTION SWITCH NOTE - FOR COLOR FASTNESS: Before using carpet cleaning chemicals, test on an inconspicuous part of the carpet for color fastness. Place the solution on a small piece of clean white cloth or tissue. Rub the carpet area vigorously with the cleaning chemical.
GENERAL INSTRUCTIONS STORAGE WHEN CLEANING IS FINISHED: FIG. 2 1. Disconnect the SOLUTION HOSE on the front of the machine by pushing in on the ring of the solution fitting. 2. Connect the drain hose (clipped to the back) to the SOLUTION HOSE fitting and place the other end into the RECOVERY TANK. Press the SOLUTION switch to the “right” position. This will activate the motor to pump any remaining solution into the RECOVERY TANK for easy drainage. 3.
SELF-CONTAINED EXTRACTOR PFX3S PARTS ref # I 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 8 order # SC276 SC339 SC340 2-3124 SC301 2-3417 SC302 SC231 SC303 SC304 SC305 SC306 SC307 SC308 SC334 SC309 SC310 2-3457* SC336 SC311 SC312 SC313 02-3478-0000 SC275 3-5589 SC314 SC315 SC316 SC317 SC318 3-5991* SC341 SC319 SC320 SC147 SC335 3-6000* 3-6001* TW091052* SC131 3-6010* 3-6011* 3-6012* SC154 SC321
Self-Contained Extractor Parts - PFX3S SELF-CONTAINED EXTRACTOR PFX3S PARTS 30 51 37 103 52 96 108 71 46 35 21 29 99 94 20 55 65 70 56 58 7 66 116 43 19 59 49 95 4 123 48 62 10 3 63 41 105 38 39 10 11 18 97 2 69 73 1 107 102 33 63 95 76 44 109 28 90 32 62 61 72 45 24 104 78 12 6 122 8 121 114 91 75 113 91 113 106 74 40 110 26 101 22 54 15 57 27 23 53 76 118 17 100 77 92 16 25 117 34 55 42 41 50 47 110 36 77 41 76 112 93 119 12
MAINTENANCE GUIDE Motors not running CAUSE: 1. Power not reaching main switch. SOLUTION: 1. Check power supply. Check fuses/circuit breaker. Contact service center. 2. Defective power cord. 2. Contact manufacturer or service center. 3. Faulty switches or wiring. 3. Contact manufacturer or service center. 4 . Blown fuse or tripped circuit breaker. 4. Reset circuit breaker according to operating instructions or replace fuse if qualified.. 5. Problem with brushes, field windings, 5.
