Product Manual

10
Warning! Empty all liquid from the machine before using the transport cart.
ACCESSORIES
The transport cart provides for ease of movement when transporting the machine.
Transport Cart
Using the transport cart
1. With the machine handle in the upright position place the cart centrally alongside the
machine.
2. By holding the machine firmly, tilt the handle away from your body. Slide the cart base
under the machine and strap it to the machine with the velcro.
3. Ensure that the velcro strap is securely wrapped around the bottom handle.
4. Now the cart is ready to use. The machine can then be maneuvered easily while
holding the top handle.
Side Brush
To clean up to walls, the side brush may be used. Switch off and unplug the machine before fitting the side brush.
Warning! Do not use side brush in a room with no wall skirting, otherwise, the wall may get dirty.
Fitting the side brush
1. Remove the front brush and brush shaft.
2. Fix the shield assembly on the side plate.
3. Insert the side brush through the shield and main brush.
Using the side brush
1. Tilt the machine at an angle, move forward. This way, the dirty water
thrown by the side brush will be collected by the rear brush.
2. Use side brush only for washing the edges
AFTER SALES SERVICE
Should you require after sales service please contact the supplier from whom you purchased the machine, who
will arrange service. Repairs and servicing should only be performed by trained staff. Improper repairs can cause
considerable danger to the user and void any warranty.