Product Manual

3
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk electric shock. This machine
is equipped with a cord having an equipment -grounding conductor and grounding plug. The
plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if
it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 115-volt circuit, and has a grounding plug that looks like
the plug illustrated in sketch A.
GROUNDING
PIN
GROUNDING
OUTLET
RECOMMENDED
GROUNDED
OUTLET BO
X
(A)
2
A
• Do not break off or pull out the ground prong on the plug.
• Do not attempt to repair a warranted machine unless instructed to do so by an authorized
shop or the factory.
• Do not use any replacement parts except those specified on the parts list. Proper
performance of the machine could be affected if substitutions are made.
• Use defoamer at all times to prevent damaging the vacuum motor.
• Do not use water in excess of 140° F (60° C).
• Failure to comply with the above warning instructions will void the warranty.
When using as an extractor
• Do not use the machine for totally dry vacuuming. This machine is not fitted with a fine dust
filter.
• Do not use citrus-based cleaners in this machine.
• Do not use cleaning chemicals in this machine except those recommended for commercial
extraction equipment.
• The use of any chemical with abrasive additives voids the warranty.
• Use defoamer at all times to prevent damaging the vacuum motor.
• Do not use water in excess of 140° F (60° C).