OPERATOR’S MANUAL NEBULA MISTER and SPECIALTY CLEANER PFMS WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
Congratulations on your purchase of a Commercial Mister and Specialty Cleaner. You are now equipped to handle any and all commercial misting and carpet cleaning jobs. Your new unit is a high quality, precision-made product. All parts used in the manufacturing of this unit have passed rigid quality control standards prior to assembly. Please safeguard the original receipt / invoice.
• • Do not break off or pull out the ground prong on the plug. Do not attempt to repair a warranted machine unless instructed to do so by an authorized shop or the factory. • Do not use any replacement parts except those specified on the parts list. Proper performance of the machine could be affected if substitutions are made. • Use defoamer at all times to prevent damaging the vacuum motor. • Do not use water in excess of 140° F (60° C).
TECHNICAL SPECIFICATIONS Model PFMS Input Voltage 115 VAC Plug Type US Cord 25’ with on-board storage GPM .05 with Atomizer Nozzle/.25 with fan nozzle/.25 Extraction Mode Amps Mist Mode 1A/Extraction Mode 8.9A Solution Tank 3.5 Gal/13.2 l Recovery Tank 2.5 Gal/9.5 l Dimensions 23” x 11” x 23” / 58.5cm x 28cm x 58.5 cm Weight 41 lbs./18.5 kg Waterlift 89”/226 cm CFM/CMM 104/3 Solution Pressure 55 p.s.i./3.8 BAR Coverage Mister model 7,500-10,000* sq.ft.
This unit can be used as either a Mister or an Extractor to use on upholstery and for detail work. The brass atomizing nozzle provides lower saturation when spraying disinfectant while a larger brass fan nozzle is provided for large area coverage. NOTE: This mister is designed for use with all water-based disinfectants from the EPA “List N”. MISTER OPERATING INSTRUCTIONS Filling the Mister • Unplug the unit. • Disconnect the solution and recovery tanks. • Remove the upper recovery tank.
The wand will come with two spray tip options. The lower micron size atomizing spray tip will already be installed on the wand. You will also get a higher micron fan nozzle as an option. This additional nozzle option will be taped onto the wand when you receive the unit. The installed atomizing nozzle is best for cleaning office areas, touch points, etc, as it does not saturate things like paper and boxes that could be found in offices, retail, hospitality, restaurant, educational type of environments.
EXTRACTOR OPERATING INSTRUCTIONS Filling the unit for use as an extractor • Unplug the unit. • Disconnect the solution and recovery tanks. • Remove the upper recovery tank. • Add water and/or chemicals to the lower solution tank. Fill only to the fill line indicated on the label on the inside of the solution tank. The tank will hold up to 3.5 gallons. Operating the extractor • Attach the solution line from the vacuum hose assembly to the quick disconnect in the pocket at the front of the machine.
Solution Hose Connection 3-Way Switch TROUBLESHOOTING Problem No Spray Possible Cause Solution Pump is not primed. Depress lever on hand tool to release pressure. Refill Solution tank.* Clean the screen filter on the hose in the solution tank. Clean the spray jet in the hand tool. Solution tank level is low. Clogged filter. Low Solution Flow Low Suction Clogged Spray jet. Recovery tank is full. Clogged Hand Tool or hose. Excessive foam. Empty recovery tank. Clean Hand Tool and hose.
1 13 2 53 3 60 4 5 59 6 7 8 9 11 12 58 10 30 57 56 55 54 53 52 50 51 14 22 15 49 16 48 17 35 18 16 19 47 20 21 46 43 44 45 22 42 23 24 61 41 25 40 26 39 27 38 28 35 29 37 31 34 30 31 36 63 32 62 33 9
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Part No.
No. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 Part No. 19498 X8201 7CZ001 PX215 FJ5082 PX204 PX214 X8271 X9064 PX209 7AJ004 72115A X8262 X9059 X8278 X1921BLK X9106 X9065 X8990 72173A 7CY001 WAN-PFMS PX35-2-4-100 Qty 1 1 18 2 1 2 1 5 1 1 1 1 6 2 2 1 2 4 1 1 1 1 1 Description Power Cord 18/3 Ga.
X9082-KIT Standpipe Kit 1 No. 1 Part No.
PX30-KIT Filter and Hose Assembly 1 2 3 4 5 6 7 8 No. 1 2 3 4 5 6 7 8 Part No. PX30 PX213 7DL003 71817A 7AT006 72115A 7AJ004 PC66 Qty 1 1 2 1 1 1 1 1 Description Solution Tank Filter Nylon Fitting 1/4” MPT x 1/4” Hose Barb Hose Clamp Braided Hose 1/4” 250 P.S.I. Brass Fitting 90° 1/4” Barb x 1/8” MPT Washer Brass Anchor Connector 1/8” FPT x MPT Fitting 1/4” Barb x 1/8” MPT For warranty information go to www.Powr-Flite.
