OPERATOR’S MANUAL Pro-Lite Upright Lightweight Vacuum PF62EC WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
Congratulations on your purchase of the Pro-Lite PF62EC. We know you will be happy with the performance and features that we selected for you. In the event that you have questions or concerns, do not hesitate to contact us at: SAFETY WARNINGS AND PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT Read and understand this owner’s manual and all labels on the unit before operating.
GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk electric shock. This machine is equipped with a cord having an equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Check the carton for shipping damage. Carefully unpack and inspect your new Powr-Flite vacuum for shipping damage. Each unit is tested and thoroughly inspected prior to shipping. If damage is discovered, immediately notify the transportation company that delivered your machine and request an inspection. As a manufacturer, we are unable to act upon any claim for concealed damage; you must originate the claim.
HOW TO ASSEMBLE WARNING: Plastic bags or film can be dangerous. To avoid danger of suffocation, keep away from babies and children. The dual Suction System is packaged for convenience and requires minimal assembly. The only tool you will need is a Phillips head screwdriver. 1. Slide the handle Tube into the Connector, aligning the hole in the Handle Tube with the molded hole at the top of the Connector. 2.
Routine Maintenance For maximum performance from your vacuum, check and maintain vacuum parts regularly. Replacing the Dust Bag Check the Dust Bag weekly. Replace the Dust Bag when it is near full or when cleaning suction diminishes. Never reuse a Dust Bag. WARNING: To avoid electrical shock or injury from moving parts, always turn OFF the Power Switch and unplug the Power Source Plug before performing maintenance or trouble shooting.
MAINTENANCE Cleaning the Filter The Post-Motor Filter is located in the Powerfoot of your vacuum cleaner. It should be checked often, and cleaned when the PostMotor Filter becomes dirty. 1. To Clean Post-Motor Filter, remove the filter cover screw with a Phillips head screwdriver. 2. Lift out Filter Cover. 3. Remove Post-Motor-Filter and wash with mild soap and water. Dry thoroughly. 4. Reinstall clean and dried Post-Motor filter. 5.
7. Place existing or new Drive Belt over Rotating Cleaning Brush and the motor shaft. Insert the end cap pin on the left of the Rotating Cleaning Brush into the slot on the Powerfoot and slide the end cap pin on the right end of the Rotating Cleaning Brush in to the slot in the Powerfoot and lower until it clicks into place. 8. Make sure the Furniture Protection Guard is still intact. 9. Align the 3 tabs on the Top Cover with the 3 slots in the Powerfoot.
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Part No.
No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 Not Shown Not Shown Not Shown Part No.
For warranty information go to www.Powr-Flite.
