Product Manual

3
CRITICAL AREA VACUUM WARNINGS
This vacuum has been specifically designed to clean up
hazardous dust and debris. Special filters reduce the risk
of airborne dust that would be created by other methods of
cleaning.
BE SURE TO READ AND FOLLOW ALL SAFETY
INSTRUCTION!
THIS EQUIPMENT SHOULD BE OPERATED BY
TRAINED PERSONSAND IN ACCORDANCE WITH ALL
LOCAL REGULATIONS.
DO NOT sweep, scoop, shovel or in any manner handle
hazardous dust and debris other than by vacuum.
DO NOT at any time attempt to remove, substitute, bypass
or by any other means change the filters in the vacuum.
Special filters are required for use in this hazardous waste
vacuum.
DO NOT use any other replacement filters, filter bags or
parts than the original equipment manufacturers.
DO NOT use without complete knowledge and under-
standing of set up, cleaning, replacing filters and filter bags
on this unit.
DO NOT use this vacuum without fully understanding the
manufacturer’s warnings, and proper use instructions.
WET USE PRECAUTIONS
This vacuum may be used for recovery of hazardous water
or wet debris.
THE WET ADAPTER KIT MUST BE INSTALLED DURING
WATER OR WET DEBRIS RECOVERY. FAILURE TO
USE THE WET ADAPTER WILL CAUSE DAMAGE TO
THE HEPA FILTER, VACUUM AND POTENTIALLY
EXPOSE THE USER TO THE HAZARDOUS MATERIAL
BEING RECOVERED.
DRY USE INSTRUCTIONS
1. Inspect vacuum to ensure that HEPA filter, HEPA pre-
filter and paper bag are in place. We recommend placing
a plastic trash bag in the bottom the unit to cover and
remove paper bag to prevent escape of contaminated
dust.
2. Dawn protective gear.
3. Vacuum DRY debris.
4. Dispose of full paper bag according to local regulations.
REPLACING PAPER BAG
1. Remove top head unit.
2. Unfasten bag retaining plate.
3. Slide full bag out of plate.
4. Slide new bag into retaining plate.
5. Fasten retaining plate.