Use and Care Manual

– 3 –

When the tank is full, using the overturning mechanism to empty the tank.

1. Remove the top head.

2. Take out the filter with frame.

3. Unlock the knob.

4. Grip the handle with one hand, use one foot to brace the dolly and lift

the handle by the other hand to empty the tank.

OTE:

hen the water level in the tank exceeds the safety level, the

safety devise will automatically block the inlet and motor turning sound

will be changed, but power will remain ON. The power must be turned

OFF before emptying the tank.

The paper filter must be removed for wet recovery.

Push the metal ping counterclockwise to release the filter.

Remove the paper filter.

The hose and swivel connector are pre-assembled at the factory.

To attach the swivel connector to the intake fitting of the canister:

1. Push the grooved cuff straight into the intake fitting.

2. To remove, press the release button on top of the intake fitting

while pulling the grooved cuff out.

1. To dismantle, unclip both latches and remove top housing and filter

with frame.

2. Wash the filter with water and allow it to dry.

3. After washing, remove excess water with a gentle squeegee.

4. Replace the filter and top housing and fasten the latches.

NOTE: This cleaner is designed with a powerful suction. Do not be

alarmed if the motor noise increases when performing tougher cleaning

work.

MAINTENANCE AND SERVICING

HOSE ATTACHMENT INSTRUCTIONS

REMOVE THE PAPER FILTER

DRAINING