WET/DRY VACUUM Models PF51, PF53, PF55, PF57 OPERATING INSTRUCTIONS COMMERCIAL WET/DRY VACUUM Equipment must be operated, serviced and maintained in accordance with the manufacturer’s instructions.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE *When using a wet/dry vacuum, basic precautions should be followed. *Read all instructions before using your vacuum. IMPORTANT SAFETY ADVICE GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
DRAINING HOSE ATTACHMENT INSTRUCTIONS When the tank is full, using the overturning mechanism to empty the tank. 1. Remove the top head. 2. Take out the filter with frame. 3. Unlock the knob. 4. Grip the handle with one hand, use one foot to brace the dolly and lift the handle by the other hand to empty the tank. NOTE: When the water level in the tank exceeds the safety level, the safety devise will automatically block the inlet and motor turning sound will be changed, but power will remain ON.
Model PF51 Parts 57 –4–
Model PF51 Parts ref # item # 2 WD88 4 WD89 7 WD90 WD91 WD92 WD93 10 WD94 11 WD95 12 WD15 13 WD96 15 WD97 17 WD99 18 WD100 20 WD101 29 WD102 30 WD103 33 WD98 41 WD104 42 WD105 49 WD111 53 WD106 56 WD107 57 WD108 58 WD109 59 WD110 description power cord top cover sponge sponge sponge sponge relief valve gasket motor motor motor holder cover float handle switch filter tank clamp wheel holder wheel hose assy wand squeegee nozzle floor tool dust brush crevice tool Model PF51 Wiring Diagram –5–
Model PF53 Parts 20 33 21 18 17 19 22 23 5 24 10 25 16 14 13 3 12 26 26 11 10 2 9 8 27 29 42 1 28 7 42 6 41 30 40 –6–
Model PF53 Parts Dolly Assembly - ref #1 WD78 WD79 WD80 WD40 WD61 WD81 WD73 WD74 WD62 FM17 WD12 WD52 handle holder handle front wheel rear wheel rear wheel shaft plate fixed plate dolly hex screw screw spring Tank Assembly - ref #2 WD38 WD63 WD44 WD45 WD86 WD46 WD47 WD50 WD76 WD77 WD51 WD59 WD60 stainless tank clamp assembly nut suction coupler button base button spring rubber washer rubber washer holder fixed plate lock cover lock button Top Head Assembly ref # item # 10 17 WD20 16 WD65 18 WD66 descri
Model PF55-PF57 Parts 20 33 21 18 17 19 22 23 5 24 10 25 16 14 13 3 12 26 26 11 10 2 9 8 27 29 42 1 28 7 42 6 41 30 40 –8–
Model PF55-PF57 Parts ref # item # Dolly Assembly - ref #1 WD71 WD72 WD75 WD40 FM17 WD41 WD42 WD43 WD12 WD74 WD1 handle holder handle front wheel hex screw rear wheel shaft of rear wheel plate screw fixed plate dolly Tank Assembly - ref #2 WD2 WD43 WD44 WD45 WD86 WD46 WD47 WD50 WD76 WD77 WD51 WD59 WD60 WD52 stainless tank clamp assembly nut suction coupler button base button spring rubber washer washer holder fixed plate fixed holder fixed holder spring Filter Assembly WD4 5 WD7 holder frame Top Assem
Model PF57 Wiring Diagram – 10 –
TROUBLE SHOOTING GUIDE Loss of Suction CAUSE: 1) Tank full. 2) Dry filter assembly clogged. 3) Clogged hose or wand. 4) Tank rim is dented. 5) Loose or broken fan. 6) Motor not working. 7) Float not functioning. 8) Seal worn. SOLUTION: 1) Empty Tank 2) Clean cloth filter. 3) Remove obstruction. 4) Replace tank. 5) Contact manufacturer of service center. 6) Contact manufacturer or service center. 7) Check to see if float moves freely or tank is full. 8) Replace seal.
3101 Wichita Court Fort Worth, TX 76140 800.880.
