Product Manual

6
TROUBLESHOOTING GUIDE
Trouble Reason Solution
Loss of Suction
1) Tank full
2) Dry filter assembly clogged
3) Clogged hose or wand
4) Tank rim is dented
5) Loose or broken fan
6) Motor not working
7) Float not functioning
8) Seal worn
1) Empty tank
2) Clean cloth filter
3) Remove obstruction
4) Replace tank
5) Contact manufacture or
service center
6) Contact manufacture or
service center
7) Check to see if float moves
freely or tank is full
8) Replace seal
Motor is not running
1) Broken switch
2) Defective power cord
3) Defective motor
1) Contact manufacture or
service center
2) Contact manufacture or
service center
3) Contact manufacture or
service center
Dust blowing from unit
1) Cloth filter dirty
2) Cloth filter is torn
3) Cloth filter is missing
1) Clean cloth filter
2) Replace filter
3) Install cloth filter when
vacuuming very fine dust,
chimney soot, or sheet rock
Water blowing from unit
1) Tank is full of liquid
2) Sudsy or foamy liquid is being
picked up
1) Empty tank
2) Add defoamer to tank