Product Manual

WAND AND ATTACHMENT INSTRUCTIONS

To assemble the two piece wand:

1. Match the alignment ridges of the upper and lower wand sections.

2. Push the upper wand into the lower wand.

To assemble tools:

1. Slide the swivel cuff of the tool onto the tapered lower wand.

2. Turn swivel cuff 1/4 turn to tighten.

DRAINING

When the tank is full:

1. Unplug and turn OFF the unit.

2. Remove the top head.

3. Take out the filter with frame.

4. Grip the tank with one hand, lift the tank with the other hand and empty the tank into

appropriate containers, according to the standard norms for the liquid disposal.

NOTE: When the water level in the tank exceeds the safety level, the safety devise will

automatically block the inlet and motor sound will be changed, but power will remain ON. The

power must be turned OFF before emptying the tank

HOSE ATTACHMENTS INSTRUCTIONS

The hose and swivel connector are pre-assembled at the factory.

To attach the swivel connector to the intake fitting of the canister:

1. Push the grooved cuff straight into the intake fitting.

2. To remove the hose, press the release button on top of the intake fitting while pulling the

grooved cuff out.

MAINTENANCE AND SERVICING

1. To dismantle, un-clip both latches and remove top housing and filter with frame.

2. Wash the filter with water and allow it to dry.

3. After washing, remove excess water with a gentle squeegee.

4. Replace the filter and top housing and fasten the latches.

NOTE: This cleaner is designed with a powerful suction. Do not be alarmed if the motor noise

increases when performing tougher cleaning work.