Product Manual

7
5. Inert the new brush roll. Ensure the belt loops around the grooved
end of brush roll and that there is tension in the belt. The brush should be
able to spin without any interference.
6. Using the 10mm wrench and Allen wrench, screw in the brush roll
with screws and nuts previously used.
7. Install belt cover and secure with previously removed screws.
MACHINE MAINTENANCE
CAUTION: Unplug the vacuum cleaner
before performing the following steps.
FOR BEST PERFORMANCE
• Keep machine and all accessories clean and in good operating
condition.
• Change vacuum bags and filters as recommended to maintain
optimum cleaning efficiency.
• Always use genuine bags, filters and parts, as use of other products
may result in poor cleaning or filtration performance. OEM filtration
products are designed for maximum performance.
• Have machine checked periodically by an authorized service
representative.
• Store machine carefully in dry area.
• For optimum cleaning performance and safety, follow your owner’s
manual.
• After each use, carefully wrap power cord around handle and check
cord for wear or damage. If cord is damaged, have power cord
replaced by an authorized service representative immediately.