Product Manual
5
HANDLE ADJUSTMENT
1. Using the wing nuts (Fig. 1), adjust the handle length to a comfortable
workng position. Tighten all wing nuts.
2. Loosen the handle lock levers (Fig. 2) on both sides of the unit and
adjust the handle to a comfortable operation height.
3. Tighten the handle lock lever on both sides to lock the handle in place.
BAG INSTALLATION
1. Attach the cloth zipper bag by placing the elastic opening seal
securely around the neck of the exhaust opening. (Fig. 3)
2. Connect the snap from the bag to the exhaust frame. (Fig. 4)
3. Connect the two snaps in the front of the bag onto the top of the wide
area vacuum sweeper.
4. Unzip cloth bag and install the paper bag inside. (Fig. 5)
5. Attach the paper bag onto the vacuum exhaust opening. (Fig. 6)
6. Completely close zipper on the cloth bag.
ATTENTION: Never operate machine without cloth bag.
Always use cloth and paper bags together.
BRUSH HEIGHT ADJUSTMENT
1. This machine has 5 brush adjustment levels.
2. To lower brush height level: depress the lower pedal down and
release one notch of ratchet at a time to desired carpet height.
3. To raise brush height level: depress the top pedal down to desired
carpet height.
4. When the machine is not in use, place nozzle in an up position to lift
brush bristles off the floor to prevent damaging the brush bristles.