OPERATOR’S MANUAL & PARTS LIST WIDE AREA SWEEPER VACUUM MODEL PF28SV WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. ©Tacony, Inc.
WHEN THE MACHINE IS DELIVERED If machine is damaged, notify the carrier immediately and request an inspection. Be sure to keep the carton, packing inserts, packing lists, and carrier’s receipt until the inspector has verified your claim.
IMPORTANT SAFETY INSTRUCTIONS Save These Instructions This vacuum is not a household appliance, intended for commercial use only. Safety Warnings and Precautions Read all instructions before using. Save These Instructions. WARNING! Following the cleaning instructions will prolong the life of this vacuum. Warning – To reduce the risk of fire, electric shock or injury: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Use only as instructed in this manual.
CONNECT TO A PROPERLY GROUNDED OUTLET ONLY! See Grounding Instructions Grounding Instructions This vacuum must be grounded! Grounding is a safety measure to reduce the risk of electrical shock to the operator should the machine malfunction or stop working. Grounding provides the path of least resistance for electric current and will trip the circuit breaker, stopping the flow of electricity. This unit is equipped with a cord that has an equipment-grounding conductor and grounding plug.
HANDLE ADJUSTMENT 1. Using the wing nuts (Fig. 1), adjust the handle length to a comfortable workng position. Tighten all wing nuts. 2. Loosen the handle lock levers (Fig. 2) on both sides of the unit and adjust the handle to a comfortable operation height. 3. Tighten the handle lock lever on both sides to lock the handle in place. BRUSH HEIGHT ADJUSTMENT 1. This machine has 5 brush adjustment levels. 2.
BRUSH ROLL REPLACEMENT OPERATION OF MACHINE 1. Plug power cord into properly grounded power outlet. 2. To turn on machine, click the ON/OFF switch to the ON position. NOTE: The vacuum does not turn on until step 3. Brush Roll Replacement for the Wide Area Sweeper Tools: • 4mm Allen Wrench • 11mm Wrench • Phillips Head Screwdriver 1. Detach belt cover by removing the 4 belt cover screws as shown in the picture below. This will expose the belt connected to the brush roll. OFF ON 3.
5. Inert the new brush roll. Ensure the belt loops around the grooved end of brush roll and that there is tension in the belt. The brush should be able to spin without any interference. 7. Install belt cover and secure with previously removed screws. MACHINE MAINTENANCE CAUTION: Unplug the vacuum cleaner before performing the following steps. 6. Using the 10mm wrench and Allen wrench, screw in the brush roll with screws and nuts previously used.
Schematics HOUSING MOTOR AND BRUSH ROLLER X9943 X9942 X9945 X9941 X9947 X9904 X9971 X9944 X9948 X9919 X9946 X9949 X9972 FAN DUCT X9923 X9974 X9976 X9973 X9977 CHASSIS X9981 X9978 X9899 X9979 8 BRUSH STRIP
Schematics X9987 HANDLE 19849 X9940 19357 32966 19990 X8150 X9986 X9984 X9983 X9982 X9988 BAGS X9991 X9992 9
Parts List PARTS # 19357 19849 32966 X9899 X9904 X9919 X9923 X9940 X9941 X9942 X9943 X9944 X9945 X9946 X9947 X9948 X9949 X9971 X9972 X9973 X9974 X9976 X9977 X9978 X9979 X9981 X9982 X9983 X9984 X9986 X9987 X9988 X9991 X9992 X8150 19990 DESCRIPTION 20A Switch Push BT DPST WAS Trigger Brush Switch Blk On/Off Switch CM-WAV Main DPST Left Rear Wheel Kit Strain Relief, PG21 WAS Belt Drive Brush Roll WAS Brush Strip WAS Handle, WAS Motor Assembly Kit Brush Guard Kit Fan Chamber Kit Brush Roller Kit Motor Fan Kit
The Limited Warranty The manufacturer warrants to the original purchaser that products manufactured are free from defects, provided such goods are installed, operated and maintained in accordance with written manuals or other instructions for a period of 1 year from date of purchase on workmanship, motor, and parts. In case you, as our customer, meet any trouble with your machine, contact a representative, who will be happy to be of service to you and will take care of any warranty issues.
A Tacony Company 3101 Wichita Court • Ft. Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 • www.Powr-Flite.