OPERATION MANUAL WIDE AREA VACUUM MODEL PF2030 WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
CUSTOMER'S RECORD Model Number: ________________________________________________________________________________________ Serial Number: _________________________________________________________________________________________ Date Purchased: _______________________________________________________________________________________ 2
IMPORTANT SAFETY INSTRUCTIONS When using an electrical wide area vacuum cleaner, basic precautions should be followed. READ ALL INSTRUCTIONS BEFORE USING VACUUM CLEANER. WARNING! To reduce the risk of fire, electric shock or injury: Do not leave machine unattended when plugged in. Unplug from outlet when not in use and before changing bags or attempting any maintenance or adjustment. Do not use outdoors or on wet surfaces. Use only as described in this manual.
GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
HANDLE ADJUSTMENT 1. Loosen handle lock lever and adjust handle to comfortable operation height 2. Tighten lever to lock handle in place. BAG INSTALLATION 1. Position the handle in normal operating position. 2. Open bag compartment lid and rest it on the handle. 3. Unzip cloth bag and install paper bag inside. 4. Attach both bag openings together onto vacuum intake housing. 5. Make sure bag is properly deployed inside machine housing. 6. Completely close zipper on cloth bag and close lid of machine.
• • • • • • • BELT ADJUSTMENT AND REPLACEMENT 1. Remove belt cover on left side of machine. 2. Loosen the motor belt adjusting screws on motor bracket. 3. Remove belt. 4. Install new belt and reposition motor to eliminate excess slack. 5. Once proper tension is set, tighten motor adjusting screws. 6. Replace belt cover on side of machine. MACHINE MAINTENANCE CAUTION: Unplug the vacuum cleaner before performing the following steps.
2.
For warranty information go to www.Powr-Flite.
